Foam -- Mineral Wool -- Accessories -- Contact Us C.S. Behler can deliver all materials with same day or next day delivery. Direct shipment to job site for large quantities is also available. |
Dow Styrofoam has proven performance since 1948. Styrofoam brand insulation,
the blue extruded polystyrene foam, has a unique, tight cell structure that leaves
no voids between cells. The result if high compression strength and unequaled resistance
to water penetration. For use in perimeter foundation, drainage panels, under slap,
cold storage, cavity wall, and protection in the commercial construction industry.
|
|||
Celotex Foam Sheathing Products have a polyisocyanurate foam core, high R
value, and a foil faced or kraft faced finish wall and cavity wall applications.
|
|||
Thermax Insulation Board products provide superior, high R-value performance for a wide range of commercial applications because of their unique glass fiber reinforced polyisocyanurate foam core structure produced by a patented process. In further terms of superiority, Thermax Insulation Board features fire performance for the broadest range of code and insurance approvals to meet concealed and exposed construction requirements. |
|||
Tuff-R Insulating Sheathing products feature a patented high performance polyisocyanurate foam core. Two choices are available, each offering the same high R-values, but with different facers to satisfy varying needs for toughness. | |||
Tuff-R features radiant barrier quality aluminum foil facers on both sides.
Available from 1" to 2" in thickness. Available in various thickness in 16", 24", or 48" widths, 8' lengths. R value- approx. 7.2 per inch. |
|||
Beadboard (EPS) | Beadboard is a low density, less expensive expanded polystyrene available in all sizes and widths. | ||
"C.S." for insulation. |
|
Styrofoam Cavitymate Product Description- Styrofoam Cavitymate brand insulation is a moisture resistant, durable and lightweight extruded polystyrene foam specifically designed for use in wet cavity wall environments. Styrofoam Cavitymate meets or exceeds the property requirements of ASTM C 578-95 Type X. Sized 16" For Cavities- Styrofoam Cavitymate is available in 1.0", 1.5" and 2.0" thick x 16" wide and 96" boards. R value- 5.0 per inch. |
|
Cavitymate Plus Product Description- Styrofoam Cavitymate Plus brand insulation is a moisture resistant, durable and lightweight extruded polystyrene foam specifically designed for use in wet cavity wall environments. Styrofoam Cavitymate Plus meets or exceeds the property requirements of ASTM C 578-85 Type IV. Sized 16" for Cavities- Styrofoam Cavitymate Plus is available in 1.5" and 2" thick x 16" wide and 96" boards. R value- 5.0 per inch. |
|
Cavitymate Ultra Product Description- Styrofoam Cavitymate Ultra brand insulation is the ultimate, moisture resistant, durable and lighweight extruded polystyrene foam specifically designed for use in wet cavity wall environments. Higher R-Value- The Dow Chemical Company manufactures Cavitymate Ultra brand insulation by using unique, patented carbon black technology. As a result, the insulation value of Cavitymate Ultra is 20% higher than standard 2" thick Styrofoam. Cavitymate Ultra meets or exceeds the property requirements of ASTM C 578-85 Type IV. Sized 16" For Cavities- Cavitymate Ultra is available in 1 5/8" and 2" nominal thicknesses x 16" wide x 96" long boards. www.dow.com |
"C.S." for insulation. |
Mineral
Wool (TOP)
Thermafiber insulations offer superior fire protection through the ability of their mineral fibers to resist temperatures up to 2,000 degrees F. By contrast, glass fiber insulations begin to disintegrate at about 1,050 degrees F. | |
Safe Insulation- All three model building codes in the U. S. A. require that
the gap at the slab at the edge/curtain wall interface be treated to maintain the
same fire integrity as the floor/ceiling. Fire protection systems with Thermafiber Safing Insulation stop fire at the juncture of floor slabs with exterior curtain wall systems of buildings. Also approved for installing around through penetrations in floors, walls and joint configurations with fire stop sealant. |
|
Curtain Wall Insulations are designed for use in curtain wall assemblies, these products provide key features for fire-containment applications:
|
|
Roxul products are mineral wool fiber insulations made from basalt rock and steel slag. This combination results in a non-combustile product with a melting point of approximately 2150 degrees F., which gives it exellent fire resistant properties. It is available FSK faced or unfaced. | |
"C.S." for insulation. |
Insulation and Mineral Wool Accessories: | |
FSK Facing Tape is tridirectionally reinforced with 2 x 3 sq. in. fiberglass
scrim, U. L. listed Foil/Scrim/Kraft lamination. Coated with a special cold weather
acrylic adhesive system which combines very high quick stick at normal temperatures
with superior low temperature performance. Widths - 2, 3, 4, 5 inches Length - 50 yards on 3 in. core. |
|
Insultation Stic pin anchors- 12 ga. 2" x 2" perforated plate with
various length pins. Self Stic pin anchors- 12 ga. 2" x 2" plate with self adhering peel and stic backing for nonporous substrates with various length pins. Stic pin adhesion for adhering stic pins. Stic pin washers various sizes. |
|
Safing clips used to hold safe insulation at concrete slab exterior wall juncture. | |
Pro Foam II is for professional use only. One component MINIMAL-EXPANDING urethane foam sealant. Fills and seals openings around doors, windows and foundations. Insulates with 5R factor per inch. Complies with current environmental regulations. | |
Multi-purpose Construction Adhesive is a versatile "dual" purpose adhesive for bonding all types of styrofoam paneling to structurally sound surfaces. | |
"C.S." for insulation. |
Email us csbehler@csbehler.com or Contact us